Confirm Connection
The SGX 5150 should now be configured for your wireless network. This can be tested by opening a web
browser and typing the SGX 5150 IP address into the address bar. When prompted for a username, enter
"admin". The password, for devices manufactured after January 1, 2020, is the last 8 characters of the Device
ID, or for older units use “PASS”. Once the user name and password have been entered click OK. If you see
the SGX 5150 homepage (shown below), you have correctly configured your SGX 5150.
(Figure 4 - SGX homepage that displays when connected and properly configured)
To Next Page
Loading...
