3. Moving your trolley
Your ClassBuddy™ trolley should always be moved with care.
Before moving the trolley the following checks/actions should be carried out,
irrespective of the distance travelled:
• Check that the power has been turned o at the wall socket.
• Carefully disconnect the mains power lead from the back of the trolley and
from the wall socket placing the power lead in the cable tidy located on the
rear door of the trolley.
• Check that any network cable (Cat5) has been disconnected from the back of
the trolley.
• Ensure that all of the trolley doors are securely closed and locked, and that
all keys have been removed.
• Disengage wheel brakes using the foot operated pedals before moving the
trolley. (Figure 3)
• Special care should be taken on inclines.
At the new location
• Ensure that all wheel brakes are applied using foot operated pedals.
• Never position the trolley in front of any fire exit or fire escape routes
• Never position the trolley in the view of any windows for security
Figure 3
Wheel brake
To Next Page
Loading...
