4
GENERAL INFORMATION AND DESCRIPTION
The LMCDS 7500 has an overall length of 14 ft. with a 5 ft. by 6 ft. treated-wood flatbed for
hauling tools and small equipment to the job site. It will lift 7500 lb. reels of various sizes or
haul a mini-excavator, basements, pads, boxes, anodes, and other materials to the job site.
Even with a full payload, the trailer can be towed behind your vehicle at the regular posted
speed limit. The hydraulic system has a flow rate of 12 gallons per minute at 2000 psi, powered
by a 20-hp Honda engine. This allows the trailer to figure-8 and rewind cable at a rate up to
750 feet per minute. The reel turning rack is powered by a 2-speed orbital motor operated
from the control panel. The control panel swings 180
o
allowing the user to efficiently operate
the hydraulic system while monitoring the activity at the rear of the trailer. The hydraulic lifting
rack makes loading and unloading a one-man operation.
Standard accessories include: auxiliary hydraulic ports for powering other tools and
accessories, two bushings, two collars, one arbor, and extra hooks located on the back of the
lifting arms.
Additional accessories available include: a second arbor, additional bushings and collars,
loading ramps, dumpster, cold-weather start kit, tension brake, dielectric fluid, light kit, PVC
rack, A frame, side roller, level winding device, figure-8 device, hydraulically-powered
generator, and a remote control.
To Next Page
Loading...