Lascar EL-SIE-2+ User Manual

EL-SIE-2+
High Accuracy Temperature and Humidity
USB Data Logger, EasyLog Cloud Compable
Monitor the environment you live and work in with the EasyLog EL-SIE-2+. Conguraon is simple, with no soware to install
on your PC or Mac – just connect the logger with a USB cable, and use your standard web browser to congure the device for
logging. You don’t even need internet access to set up and use the EL-SIE-2+, it really couldn’t be easier.
The logging interval can be set between 10 seconds and 24 hours, with immediate, delayed, triggered or push-to-start logging.
Alarms are fully user congurable, with funconality including cumulave alarms, pre-alarms, a delay before alarm triggering,
and an alarm hold opon, which connues showing the alarm condion even if the reading returns to an acceptable level.
The display shows current, maximum and minimum readings, and three coloured LEDs indicate device status at a glance.
Once logging is complete, re-connect to your computer and use your browser to view, analyse and save your data. You can also
choose to upload your data to an Easy Log Cloud account, making the data accessible online for powerful graphing, analysis and
report generaon.
Typical baery life is over 1 year using standard AAA alkaline baeries, and a wall mounng bracket is supplied with the device.
• -18 to +55°C (-0.4 to +131°F) temperature measurement range
• 0 to 100%RH humidity measurement range
• Stores over 1,000,000 readings (As per spec table)
• No soware to install - congure using your normal web browser
• Use with a PC or Mac
• Display shows current, maximum and minimum readings
• Status and alarm indicators
• On-board alarm sounder
• Data can be uploaded to the EasyLog Cloud
ACCESSORIES
BAT 1V5 AAA 2 x AAA 1.5V alkaline
baeries
CABLE USB 3.1 C 1M USB A to USB C Cable
INCLUDED IN THE BOX
BAT 1V5 AAA 2 x AAA 1.5V alkaline
baeries
EL-SIE WALL BRACKET Mounng bracket
CABLE USB 3.1 C 1M USB A to USB C Cable
Temperature Measurement range -18 to +55°C (-0.4 to +131°F)
Resoluon 0.01°
Accuracy ±0.2°C (±0.36°F) typical
Long term stability <0.03°C (<0.054°F) / year
Measurement units °C, °F or K
Relave Humidity Measurement range 0 to 100%RH
Resoluon 0.1%
Accuracy ±1.5% typical (0 to 80%RH)
Long term stability <0.25%RH / year typical
Logging rate 10 seconds to 24 hours, user selectable
Start modes Immediate, push to start, triggered start,
parameter triggered
Memory capacity Over 1,000,000 total readings >500,000 readings per
channel
Sounder Integrated alarm sounder
Power source 2 x AAA 1.5V baery
Baery life >1 year (at 25°C with 10 minute logging rate)
Dimensions 93 x 42 x 17 mm (excluding bracket)
Operang temperature range -18 to +55°C (-0.4 to +131°F)
Environmental rang IP4X
SPECIFICATIONS
CALIBRATION CERTIFICATES AVAILABLE
Lascar oers a Traceable Calibraon Cercate Service on Temperature Data Loggers. Using reference equipment
which has been calibrated by a UKAS/NIST/CNAS accredited laboratory and using apparatus traceable to naonal or
internaonal standards. For more informaon please see www.lascarelectronics.com.

Lascar EL-SIE-2+ Specifications

General

Model	EL-SIE-2+
Type	Temperature and Humidity Data Logger
Humidity Range	0 to 100 %RH
Interface	USB
Wireless Connectivity	No
Temperature Resolution	0.1 °C
Humidity Accuracy	±3.0 %RH
Weight	100 g