Need help?Do you have a question about the Laser 4806 and is the answer not in the manual?
Explains the purpose of the Bootgun for stretching flexible CV boots on vehicles.
Details operating air pressure, weight, dimensions, noise level, and maximum joint diameter.
Provides crucial safety instructions for operating the Bootgun, including air pressure limits and avoiding moving parts.
Guidance on pre-use checks, including screws, potential damage, and air line pressure.
States that no routine maintenance is needed and only genuine spare parts should be used.
Notes no assembly is required and the air adaptor may be exchanged if needed.
Instruction to slide the boot onto the arms, ensuring they protrude from the small end.
Press the '+' button to open arms sufficiently to pass over the joint, keeping hands clear.
Disconnect the air line; arms remain open until the '-' button is pressed.
Place Bootgun over CV joint, press release button ('-'), and keep hands away.
Slide the boot off the Bootgun onto the axle, completing the installation.
Diagram showing the exploded view and numbered parts of the CV Bootgun.
Details on warranty claims for faulty materials or workmanship, excluding normal wear and tear.
To Next Page
General
