QUICK OPERATION GUIDE SPK-BT660
BLUETOOTH MODE – HOW TO CONNECT
Turn ON your SPK-BT660 speaker and Smart device
Turn Bluetooth ON on both devices and search for your new SPK-BT660 speaker.
Once the device is found, click to connect
Your device is now paired and ready to play music.
Note: If a password is required, simply enter “0000” (four zeros).
USB / TF Card
Insert the Micro SD Card or USB Memory into the slot
Your SPK-BT660 will begin playback automatically
FM RADIO
To begin, select radio mode then press the PLAY/PAUSE button to search FM channel
automatically.
Note: This operation will scan all FM stations and Pre-record them to memory. This
process can take several minutes to complete. Please avoid pressing any buttons during
this time.
AUX-IN
Insert the audio cable into AUX slot, and press M button to switch to Aux-in mode.
Note: Under AUX mode, the PREVIOUS/NEXT PLAY/PAUSE buttons will be unavailable for
use.
KARAOKE
Simply insert the wired microphone cable into the MIC port. You are then ready to begin
For further product information and instructions please visit our product web page at
www.laserco.com.au or email www.laserco.com.au/supports/email.php
Please note: As continuous improvements are made to this product, slight operational differences may
occur. For the most up-to-date user manual, please visit our web site.
To Next Page
Loading...
Need help?
General
