EasyManuals Logo

LaserLiner AutoSmart-Laser Manual

LaserLiner AutoSmart-Laser
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
AutoSmart-Laser
13
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
EU directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=asmalas
Technical data (Subject to technical alterations. 18W32)
Self-levelling range ±
Precision ± 0.4 mm / m
Horizontal / vertical levelling
Automatic with electronic sensors
and servo motors
Self-levelling alignment time
Approx. 50 seconds over the entire
operating angle
Vertical reference beams 90° to rotation plane
Rotation speed 0, 150, 300, 600 rpm
Laser wavelength 635 nm
Laser class 2 / < 1 mW
Power supply Alkali batteries (4x type AA)
Non-rechargeable battery life approx. 12 h
Operating conditions
-10°C ... +40°, max. humidity 80%rH,
no condensation, max. working
altitude 4000 m above sea level
Storage conditions -10°C ... +70°, max. humidity 80%rH
Dimensions (W x H x D) /
Weight (incl. battery)
155 x 130 x 150 mm /
0,75 kg
EN

Other manuals for LaserLiner AutoSmart-Laser

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLiner AutoSmart-Laser and is the answer not in the manual?

LaserLiner AutoSmart-Laser Specifications

General IconGeneral
BrandLaserLiner
ModelAutoSmart-Laser
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals