12
EN
5
4
2
3
1
This electric location device is designed to detect metal and
live lines in all non-metallic materials. The detection of objects
is displayed with visual and acoustic signals.
Completely read through the operating instructions, the
„Warranty and Additional Information“ booklet as well
as the latest information under the internet link at the
end of these instructions. Follow the instructions they
contain. These documents must be kept in a safe place
and passed on together with the product.
!
Intended use
1
2
3
4
5
Maximum display
Live wire warning
VTN display
ON / OFF
Switching measuring
mode (MODE)
Manual calibration (CAL)
Always switch off the power supply
when working in METAL-SCAN mode
in the vicinity of electric conductors.
!
To Next Page
Loading...
Need help?
General
