EasyManuals Logo

LaserLiner CombiFinder Plus User Manual

LaserLiner CombiFinder Plus
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
CombiFinder Plus
EN
Safety instructions
The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
The structure of the device must not be modified in any way.
Do not work alone in the vicinity of hazardous electrical
installations and only under the guidance of a qualified
electrician.
Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Switch off the device before removing the battery.
The device must no longer be used if one or more of its
functions fail, the battery charge is weak, or the housing
has been damaged.
Take particular care when the AC warning is displayed
(corresponds to voltages > 50 Vrms)
Attention: The voltage warning display may become
unreliable due to shielded cables or insulation, and dangerous
voltage may be present even if it is not displayed as such.
The measuring device must not be used as a substitute for
a two-pole zero potential test.
Additional information on use
Observe the technical safety regulations for working on
electrical systems, especially: 1. Safely isolating from power
supply, 2. Securing to prevent system being switched on
again, 3. Checking zero potential, two-pole, 4. Earthing
and short-circuiting, 5. Securing and covering adjacent
live components.
Safety instructions
Dealing with electromagnetic radiation
The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance
with EMC-Directive 2014/30/EU.
Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating elds.
Precautions: Do not use any other CombiFinder Plus within a
distance of 5 m. Do not use any electronic transmitters
or electric motors in the vicinity.

Other manuals for LaserLiner CombiFinder Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLiner CombiFinder Plus and is the answer not in the manual?

LaserLiner CombiFinder Plus Specifications

General IconGeneral
BrandLaserLiner
ModelCombiFinder Plus
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals