LaserLiner DampCheck Operating Instructions

DampCheck
07
6
DampCheck
1
2
3
4
5
a
c
b
d
e
f
g
Read the operating instructions and the enclosed brochure
„Guarantee and additional notices“ completely. Follow the
instructions they contain. This document must be kept in a
safe place and passed on together with the device.
!
Function / application
This material moisture instrument detects and evaluates the material
moisture content of wood and building materials by way of electric
resistance measurement. The displayed value is material moisture in
% with respect to dry mass. Example: 100% material moisture for
1 kg of wet wood = 500 g water. The device can also be set up to
measure the ambient temperature
Protective covers
Measuring electrodes
LC display
LED wet/dry indicator:
Green = dry
Yellow = moist
Red = wet
ON switch;
Measuring mode/unit of
temperature selection;
Hold function
Battery compartment (rear)
Measured value display
Hold function
Battery charge
Measuring mode Wood
Unit of measurement°C / °F
Unit of measurement %
Measuring mode
Building Materials
1
2
3
4
5
6
a
b
c
d
e
f
g
EN

LaserLiner DampCheck Specifications

General

Battery type	LR44
Battery voltage	1.5 V
Number of batteries supported	4
Storage temperature (T-T)	-10 - 50 °C
Storage relative humidity (H-H)	0 - 85 %
Built-in display	Yes
Purpose	-
Accuracy	2 %
Temperature measuring range	- °C

Weight and Dimensions

Depth	16 mm
Width	46 mm
Height	85 mm
Weight	49 g