LaserLiner DampCheck - Calibration, Technical Data, and Notices; Calibration and Technical Data; Operational Safety and Disposal

DampCheck
11
Calibration
The meter needs to be calibrated and tested on a regular basis to
ensure it produces accurate measurement results. We recommend
carrying out calibration once a year.
General notices
Functional and operational safety is only warranted when the
instrument is operated within the specied climatic conditions and is
only used for those purposes for which it is designed. Responsibility
for the interpretation of measurement results and consequent actions
taken lie entirely with the user.
EU directives and disposal
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=ABQ
Subject to technical changes without notice. 20W03
EN
Technical data
Variable
Moisture content of material
(resistive)
Ambient temperature
Mode
Wood (1 group)
Building materials (1 material)
Measurement range wood
Wood group A: 6% … 60%
Accuracy (absolute) wood
± 2%
Resolution wood 1%
Measuring range building
materials
0.2% ... 2.9%
Accuracy (absolute) building
materials
± 0.3%
Resolution building materials
0.1%
Measurement range
ambient temperature
0°C … 40°C
Accuracy ambient temperature
± 2°C
Resolution ambient temperature 1°C
Power supply
4 x 1.5V LR44 (AG13)
Operating time
approx. 55 hours
Operating conditions
0°C … 40°C, max. humidity
85% rH, no condensation,
max. working altitude 2000 m
above sea level)
Storage conditions
-10°C … 50°C, max. humidity
85% rH
Dimensions (W x H x D) 46 x 85 x 16 mm
Weight 41 g (incl. batteries)