LaserLiner DampCheck User Manual

DampCheck
07
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– The structure of the device must not be modied in any way.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or signicant vibration.
– The device must no longer be used if one or more of its functions
fail or the battery charge is weak.
– Do not use the measuring probe with an external voltage.
– Please ensure compliance with the safety regulations set out by
local and national authorities with regard to the correct and proper
use of the device.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating elds.
a
c
b
d
e
f
g
Completely read through the operating instructions, the
"Warranty and Additional Information" booklet as well as
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
!
Function / application
This material moisture instrument detects and evaluates the material
moisture content of wood and building materials by way of electric
resistance measurement. The displayed value is material moisture in
% with respect to dry mass. Example: 100% material moisture for
1 kg of wet wood = 500 g water. The device can also be set up to
measure the ambient temperature.
Measured value display
Hold function
Battery charge
Measuring mode Wood
Unit of measurement °C / °F
Unit of measurement %
Measuring mode
Building Materials
a
b
c
d
e
f
g
EN

LaserLiner DampCheck Specifications

General

Battery type	LR44
Battery voltage	1.5 V
Number of batteries supported	4
Storage temperature (T-T)	-10 - 50 °C
Storage relative humidity (H-H)	0 - 85 %
Built-in display	Yes
Purpose	-
Accuracy	2 %
Temperature measuring range	- °C

Weight and Dimensions

Depth	16 mm
Width	46 mm
Height	85 mm
Weight	49 g