EasyManuals Logo

LaserLiner LaserCube User Manual

LaserLiner LaserCube
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
LaserCube
05
Completely read through the operating instructions, the
„Warranty and Additional Information“ booklet as well as the
latest information under the internet link at the end of these
instructions. Follow the instructions they contain. This document
must be kept in a safe place and if the laser device is passed
on, this document must be passed on with it.
!
Intended use
This line laser is suitable for alignment work on the floor and on the
wall. The device can be aligned using vertical and horizontal vials and
can also be used as a laser spirit level. The special pins allow fastening
to fine plaster, wallpaper, wood and veneered surfaces.
General safety instructions
The device must only be used in accordance with its intended
purpose and within the scope of the specications.
The measuring tools and accessories are not toys.
Keep out of reach of children.
Modications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specications.
Do not expose the device to mechanical stress, extreme
temperatures, moisture or signicant vibration.
The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Attention: Do not look into the direct or reected beam.
– Do not point the laser beam towards persons.
If a person‘s eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
Under no circumstances should optical instruments (magnifying
glass, microscope, binoculars) be used to look at the laser beam
or reections.
– Do not use the laser at eye level (1.40 … 1.90 m)
Reective, specular or shiny surfaces must be covered whilst laser
devices are in operation.
In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
Safety instructions
Using class 2 lasers
Laser radiation!
Do not stare into the beam!
Class 2 laser < 1 mW · 635 nm
EN 60825-1:2014/AC:2017
EN

Table of Contents

Other manuals for LaserLiner LaserCube

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLiner LaserCube and is the answer not in the manual?

LaserLiner LaserCube Specifications

General IconGeneral
BrandLaserLiner
ModelLaserCube
CategoryLaser Level
LanguageEnglish

Related product manuals