LaserLiner LaserCube - Mounting on the Wall

LaserCube
07
3
4
1. Place device on the wall.
2. Push the special pins through the appropriate holes.
Mounting on the wall
Wall applications
Mount the device on the wall for horizontal and vertical levelling.
Then align the device with the vials.
Technical data
(Subject to technical changes without notice. 23W10)
Accuracy ± 1 mm / m
Laser wavelength 635 nm
Laser class 2 / < 1 mW (EN 60825-1:2014/AC:2017)
Power supply
3 x alkaline batteries
(LR 44 / AG13 / V13GA)
Operating time 4 hours (alkaline batteries)
Operating conditions
0°C ... 40°C, max. humidity 80% rH,
no condensation, max. working altitude
4000 m above sea level
Storage conditions -10°C ... 70°C, max. humidity 80% rH
Dimensions (W x H x D)
38 x 38 x 38 mm
Weight 36 g (incl. batteries)
EU and UK directives and disposal
This device complies with all necessary standards for the free
movement of goods within the EU and the UK.
This product, including accessories and packaging, is an electrical
appliance that must be recycled in an environmentally appropriate
manner in accordance with European and UK directives on waste
electrical and electronic equipment, batteries and packaging,
in order to recover valuable raw materials.
Further safety and supplementary notices at:
https://packd.li/ll/ACT/in
EN