06
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU which is covered by the
Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers – may
apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating elds.
1
–
3
1
4
2
Inserting batteries
Open the battery compartment
and insert batteries according
to the symbols. Be sure to pay
attention to polarity.
Laser output windows
Battery compartment
(bottom)
ON / OFF switch
Vials
1
2
3
4
2
A
B
The vials are only adjusted
for the four A bearing
surfaces (see image). When
placed on the B surfaces,
the device cannot be used
as a spirit level.
!
On-floor applications
Place the device on the oor and switch on.
EN
To Next Page
Loading...
Need help?
General
