MetricMaster Plus
09
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info/?an=AGZ
Technical data
(Subject to technical changes without notice. 18W40)
Measurement range 0 … 150 mm / 0 … 6“
Resolution 0,01 mm / 0.0005“
Accuracy ± 0,03 mm / 0,0005“
Operating conditions
0°C…30°C, Max. humidity
80%rH, no condensation, Max.
working altitude 4000 m above
sea level
Storage conditions
0°C…50°C,
Max. humidity 80%rH
Power supply 1x LR44 button cell
Dimensions (W x H x D) 246 x 77 x 17 mm
Weight (incl. battery) 175 g
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Remove the battery(ies)
before storing for longer periods. Store the device in a clean and
dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to
ensure it produces accurate measurement results. We recommend
carrying out calibration once a year.
The zero setting must be checked prior to every use by sliding
the measuring jaws together.
EN
To Next Page
Loading...
Need help?
General
