LaserLiner MetricStar User Manual

MetricStar
07
MetricStar
MetricStar
ON/OFF ZERO
HOLD
MetricStar
MetricStar
ON/OFF ZERO
HOLD
MetricStar
ON/OFF ZERO
HOLD
MetricStar
ON/OFF ZERO
HOLD
17 mm
MetricStar
ON/OFF ZERO
HOLD
13 mm
Problem Possible cause Solution
Flashing numbers Low voltage Replace the battery
No display Low voltage Replace the battery
No display Poor contact Clean the battery
Irregular or
frozen display
Internal fault Remove the battery,
wait 1 minute,
insert the battery
4
Depth measurement
5
Differential measurement through zeroing
6
Level measurement
Automatic switch-off
The device switches off automatically if left idle for about 5 minutes.
Error recovery
2 3
External measurement Internal measurement
MetricStar
ON/OFF ZERO
HOLD
MetricStar
ON/OFF ZERO
HOLD
7
Hold function
Press the HOLD button (8) to keep the current measured value on
the display.
EN

LaserLiner MetricStar Specifications

General

Brand	LaserLiner
Model	MetricStar
Category	Measuring Instruments
Language	English