Voltage measurement AC/DC
5
V AC/DC
AC, DC, Hz
and % selection Connect the measuring contacts
to the object to be tested
RedBlack
μA / mA / 10A AC/DC
selection
Connect the measuring contacts
to the object to be tested
Red Black
Do not measure currents in the 10 A for longer than 30 seconds. This could damage the device
or the test prods.
!
Current measurement AC/DC
4
Disconnect the circuit before connecting the meter.
!
3
Connection of test prods
The black test prod (–) must always be connected to the „COM socket“. Connect the red test prod (+)
as illustrated.
Please ensure that the test prods are connected correctly before each measurement.
Taking a voltage measurement with 10 A current connectors plugged in or in the mA range
can cause the built-in fuse to trip and damage the measuring circuit.
!
Current measurement 10 A Voltage, resistance, frequency,
duty factor measurement, diode,
continuity check, capacitance
measurement, contact temperature
measurement
Current measurement μA and mA
EN
To Next Page
Loading...
Need help?
General
