SmartVision-Laser
09
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017
Safety instructions
Using class 2 lasers
Function / Application
This cross line line laser produces two individually switchable,
green laser lines, providing precise alignment of horizontal
and vertical surfaces. The laser is easy to deploy due to the
adjustable clamping bracket. The device has an integral
handheld receiver mode.
Completely read through the operating instructions, the
„Warranty and Additional Information“ booklet as well
as the latest information under the internet link at the
end of these instructions. Follow the instructions they
contain.This document must be kept in a safe place and
if the laser device is passed on, this document must be
passed on with it.
!
EN
General safety instructions
–
The device must only be used in accordance with its
intendedpurpose
and within the scope of the specications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specications.
–
Do not expose the device to mechanical stress, extreme
temperatures,
moisture or signicant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
To Next Page
Loading...
Need help?
General
