LaserLiner SuperLine 2D User Manual

10
5
Setting an angle
The scale ring (6) and the device can be rotated
independently of one another. This makes it easy to set any
desired angle.
The device must only be used in accordance with
its intendedpurpose and within the scope of the
specications. Keep out of reach of children.
!
Modications or changes to the device are not
permitted, this will otherwise invalidate the approval
and safety specications.
!
Regularly check the calibration before use, after
transport and after extended periods of storage.
!
4
Mounting on the wall
1. Place device on the wall.
2. Push the special pins through
the holes provided.
3
Wall applications
For horizontal and vertical levelling x the baseplate to the
wall with the special pins (7). The optional adhesive strips
can be used for this, Laserliner ConTacts (Art-No: 081.101A).
Then place the device onto the baseplate and align the levels
vertically and/or horizontally.
EN

LaserLiner SuperLine 2D Specifications

General

Brand	LaserLiner
Model	SuperLine 2D
Category	Measuring Instruments
Language	English