LaserLiner ThermoXplorer Pro User Manual

30
2014
01 s
30
15
12
01
DD.MM.YY
7
8
GB
General settings: Date / Time
Date / Time
Year
Month
Day
Hour
Minute
Second
Date format
Measurement
Level/Span
Setup
File
Measurement
Adjustment
Alarm / ISO
Date / Time
System Setup
System Info
Fact Default
Selecting
date format
Measurement-specic settings: Measurement
Measurement
Level/Span
Setup
File
Add measurement points
Two measurement points
(S1 and S2) can be added.
Add Hot Spot
Hot spot (SH) shows the
hottest point.
Add Cold Spot
Cold spot (SC) shows the
coldest point.
Activate horizontal line
measurement (LH)
Activate vertical line
measurement (LV)
Add measurement areas
Three measurement areas
(T1 to T3) can be added.
All added measurement points, lines and areas are removed by selecting „None“.
!
Refer to Section 16 ff to 20 f
Measurement
Type
None
Measurement
Type
Add Spot
Measurement
Type
Add Hot Spot
Measurement
Type
Add Cold Spot
Measurement
Type
Horizontal
Measurement
Type
Vertical
Measurement
Type
Add Area

LaserLiner ThermoXplorer Pro Specifications

General

Brand	LaserLiner
Model	ThermoXplorer Pro
Category	IP Camera
Language	English