LaserLiner ThermoXplorer Pro User Manual

ThermoXplorer Pro
35
12.0
°C50.0
50.0
1.0
12.1
°C
°C
°C
50.0
50.0
1.0
°C
°C
°C
50.0
50.0
1.0
°C
°C
°C
50.0
50.0
50.0
GB
Measurement
Level/Span
Setup
File
Measurement
Adjustment
Alarm / ISO
Date / Time
System Setup
System Info
Fact Default
Temperature alarm
Alarm type
Alarm temperature
Alarm Color
High Temperature overshot
Low Temperature undershot
DP Dew point reached
Auto (Off)
Black
White
Red
Orange
Yellow
Green
Blue
Gray
Purple
A measurement point, a measurement area or a horizontal/vertical line
is required to use the alarm function.
!
Set temperature limit
An alarm tone signals whether the set temperature range is overshot or undershot and
whether the dew point is reached. The dew point is calculated automatically.
Temp Alarm
Alarm type
Set Alarm Temp.
Alarm Color
Isotherm Color
Isotherm Temp
Isotherm Width
Temp Alarm
Alarm type
Set Alarm Temp.
Alarm Color
Isotherm Color
Isotherm Temp
Isotherm Width
Temp Alarm
Alarm type
Set Alarm Temp.
Alarm Color
Temp Alarm
Alarm type
Set Alarm Temp.
Alarm Color
Temp Alarm
Alarm type
Set Alarm Temp.
Alarm Color
Measurement-specic settings: Alarm / ISO
Alarm / ISO
Temp Alarm
Alarm type
Set Alarm Temp.
Alarm Color
Isotherm Color
Isotherm Temp
Isotherm Width
Off
High
Auto (None)
Off
Alarm / ISO
Off
High
Auto (None)
Off
Alarm / ISO
On
High
Auto (None)
Off
Alarm / ISO
Alarm / ISO
On
High
High
Auto (None)
Auto (None)
Alarm / ISO
On
On
High
Auto (None)

LaserLiner ThermoXplorer Pro Specifications

General

Brand	LaserLiner
Model	ThermoXplorer Pro
Category	IP Camera
Language	English