Measure Height (3-pt Routine) Continued
[
5
]
Height measurement is calculated , display ashes then solid
with calculated height value.
• The laser sensor does not measure when taking
the two inclination angle measurements. You do
not need a clear line of sight to the bottom or top
of your target.
• The sequence of the two inclination angles shots
does not matter: Bottom to Top OR Top to Bottom.
• Press the Down arrow during the Height routine
to re-measure previous measurement (ANG__1
or ANG_2), Ideal for taking multiple height
measurements on the same target.
Helpful Tip
To Next Page
Loading...
Need help?
General
