Lasertec TruPulse L2 - Page 18

Measure 2D Vertical Missing Line
[
1
]
Press Up or Down buttons until is displayed.
[
2
]
Aim where you have a clear line of sight to the target and press-and-hold
re button .
[
2.1
]
The laser indicator will be displayed. When the measurement is
acquired Shot.1 results will be displayed.
[
3
] is displayed, Aim where you have a clear line of sight at target, press-
and-hold re button.
[
3.1
]
The laser indicator will be displayed. When the measurement is
acquired Shot.2 results will be displayed.