Measure 2D Vertical Missing Line Continued
[
4
]
The HD and INC ML values will be calculated and displayed
, press up arrow to scroll through the SD and VD ML values
[
5
]
Press down arrow to scroll to and re-measure the Shot.2,
[
6
]
Continue to press down arrow to return to step 1.
• Position yourself where shot 1 and 2 are made looking in the same
direction with a clear line of sight to both targets.
• The VD solution will always be accurate no matter which direction shot 1
and 2 are taken.
• If shot 2 is longer and higher than shot 2, the VD value will be negative.
Helpful Tip
from shot 1 to shot 2. Press re button to return to step 1.
To Next Page
Loading...
