ATSC Converter Box
@
Press "LANGUAGE" to select OSD language: English, French,
Spanish.
5-5. Antenna Setup
CD
Press "ANT LEVEL" to display Antenna Level.
(2)
Press "CH+/CH." to select the channel. It will show the current channel
signal strength and quality.
(3)
Adjust the antenna direction and position to receive the signal strength
level 60 or higher.
@
Press "ANT LEVEL" again to exit the antenna signal level information.
Note: Before operating the other functions, you have to exit the ANT
LEVEL.
- 10 -
To Next Page