Need help?Do you have a question about the Lastec 721XR and is the answer not in the manual?
General| Cutting Width | 72 inches |
|---|---|
| Engine | Kubota WG972-GL |
| Fuel Tank Capacity | 12 gallons |
| Transmission | Hydrostatic |
| Speed Range | 0-10 mph |
| Turning Radius | 0 inches |
Emphasizes the importance of reading and understanding the operator's manual before use.
Instructions for recording model and serial numbers and validating the warranty.
Guidance on contacting distributors for ordering genuine Lastec parts.
Details the Lastec limited warranty terms for equipment and parts.
Information on warranties provided by manufacturers of specific components like the gearbox.
Provides advice on servicing the Articulator, emphasizing genuine parts.
Presents the Lastec Warranty Registration Form for validating the product warranty.
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Identifies safety symbols found on the deck and their meanings for operator awareness.
Provides information on the manual's purpose, scope, and how to interpret its content.
Stresses the importance of keeping all safety covers and guards installed for safe operation.
Outlines essential safety precautions to follow before starting and operating the Articulator.
Details safety guidelines to adhere to during the actual operation of the Articulator.
Specifies safety procedures to follow when performing maintenance or adjustments on the Articulator.
Provides essential safety guidelines for storing the Articulator properly.
Lists potential hazards, their risk sources, and recommended control measures.
Step-by-step guide for assembling the Lastec Articulator before mounting.
Instructions for securely mounting the Articulator to a tractor's three-point hitch.
Procedure for correctly installing the hose spring assembly from the traction unit to the deck.
Details how to verify the PTO shaft's operating range for safe and proper function.
Instructions for checking and maintaining the gearbox oil level and condition.
Procedure for adjusting and leveling the mower decks for optimal performance.
Guide on how to adjust the cutting height of the mower decks using spacers.
Information on inspecting, maintaining, and checking the tension of deck drive belts.
Instructions for checking deck belt tension and aligning the mower decks.
Safety precautions and instructions for inspecting and maintaining the mower blades.
Guidelines for verifying the function and condition of the mower deck gauge wheels.
General checks including decals, covers, and overall unit inspection for safety.
A comprehensive checklist for inspecting the Articulator before each operation.
Instructions and safety precautions for transporting the Articulator using its hydraulic system.
Detailed steps and safety warnings for operating the hydraulic lift system of the Articulator.
Essential steps and safety checks required before beginning cutting operations.
Guidance on selecting the appropriate Lastec blades based on cutting conditions.
Recommendations for optimal ground speed during operation to prevent damage and ensure efficiency.
Safety advice and precautions for operating the Articulator while moving in reverse.
Guidelines for safely operating the Articulator in challenging contoured terrain.
Advice on operating the Articulator in wet conditions for optimal performance and turf care.
Procedure for re-leveling the mower decks as part of maintenance.
Routine maintenance tasks to be performed every 8 operating hours.
Specific maintenance checks required during the initial 8 hours of operation.
Maintenance tasks to be completed after the first 50 hours of operation.
Scheduled maintenance to be performed every 50 operating hours.
Maintenance tasks required at intervals of 200 operating hours.
Scheduled maintenance to be performed every 500 operating hours.
Annual maintenance procedures for the Articulator, including part replacements.
Detailed specifications for the 521XR, 721XR, and 721XRT Articulator models.
A comprehensive chart outlining maintenance tasks based on operating hours.
Table of suggested torque values for various bolts used on the Articulator.
To Next Page
