Need help?Do you have a question about the Lastec 3372 and is the answer not in the manual?
General| Brand | Lastec |
|---|---|
| Model | 3372 |
| Category | Lawn Mower |
| Language | English |
Importance of reading the manual for safe and knowledgeable operation.
Recording model and serial numbers for warranty validation.
How to contact distributors for ordering parts using model and serial numbers.
Details of the limited warranty for parts and labor, including wear components.
Information on warranties for specific mower components like engine, clutch, pumps.
Importance of using genuine parts and routine inspection, cleaning, and maintenance.
Instructions for completing and returning the warranty registration form.
Legend explaining DANGER, WARNING, and CAUTION symbols and their hazard implications.
Purpose of the manual to assist in safe operation and maintenance of the mower.
Emphasizes never operating the mower with safety covers removed for operator safety.
Crucial safety rules to follow before operating the mower, including checks and precautions.
Safety guidelines to follow during mower operation, covering personnel, covers, and seatbelt use.
Safety precautions to take when performing maintenance, including handling fuel and securing the mower.
Guidelines for safely storing the Lastec Mower, focusing on fuel, ventilation, and cleaning.
Safety warnings and procedures when working with the mower's battery, including acid hazards.
Instructions on how to set and release the parking brake for safety during setup and operation.
Safety precautions for handling fuel and instructions on fueling the mower.
Procedures for accessing and securing the engine cover and operator seat pan for maintenance.
Location and function of the fuel shut-off valve for selecting fuel tanks.
Importance of checking engine oil level and quality, and proper oil type and viscosity.
Location and maintenance of the air cleaner elements for engine performance.
Procedures for checking coolant level, condition, and cleaning the radiator for engine cooling.
Guidelines for checking hydraulic fluid level and condition, and using the correct fluid.
Steps for adjusting hydrostatic pumps to prevent drive wheel creeping.
Procedure for adjusting hydrostatic pumps for safe towing of the mower.
Inspection and tensioning of the hydrostatic pump drive belt.
Inspection and tensioning of the mower deck drive belt.
Inspection of mower deck belts for wear, damage, and proper tension.
Importance of the weight transfer system and checking its springs for proper mounting.
Safety precautions and procedures for inspecting, adjusting, or changing mower blades.
Checking the operator seat and adjusting it for optimal operator position and comfort.
Checking steering control arms for proper linkage, freedom of movement, and neutral lock.
Procedures for adjusting the mower deck height to the desired cutting level.
Adjusting anti-scalp wheels by aligning attachment bolts for proper deck height.
Steps for calibrating the mower deck height for a level cut.
Checking tire air pressure and ensuring mower deck wheels function correctly.
Performing a general inspection of the mower for safety and proper installation of parts.
Checking engine exhaust and listening for unusual noises during operation.
Locating and recording the hour meter reading for maintenance tracking.
Reminder to complete maintenance checklists in a timely manner.
A comprehensive checklist of items to inspect before each operation of the Lastec Mower.
Safety warnings and step-by-step instructions for starting the Lastec Mower engine.
Procedure for safely stopping the Lastec Mower engine.
Safety warnings and explanation of how to control the mower's movement using steering arms.
Guidelines for using ground speed appropriately, especially on contours and hills.
Safety precautions and procedure for engaging the mower deck blades.
Procedure for adjusting the mule pulley to maintain proper drive belt tension.
General safety warnings and importance of proper maintenance for warranty and performance.
Daily maintenance tasks including greasing, inspection of seals, and checking brake cables.
Maintenance task to change the hydraulic oil and filter after the first 25 operating hours.
Maintenance task to change engine oil and filter after the first 50 operating hours.
Inspection of fuel lines, greasing spindle bearings, and inspecting bushings.
Inspecting air cleaner and fan belts for wear or damage.
Tasks include changing engine oil/filter and hydraulic oil/filter.
Replace fuel filter cartridge as part of the 400-hour maintenance.
Tasks include wheel bearings, flushing fuel/radiator, and replacing belts.
Annual maintenance includes replacing air cleaner filters, changing hydraulic oil/filter, and rotating tires.
Bi-annual maintenance includes replacing fuel/radiator hoses, clamps, and the battery.
A comprehensive schedule detailing maintenance tasks at various operating hour intervals.
Detailed specifications for the mower, including deck configuration, dimensions, and components.
Engine specifications, including model, bore, stroke, power, oil, fuel, and filters.
Diagram illustrating the hydraulic system for serial numbers 1710505 and prior.
Wiring schematic for serial numbers 1710505 and prior, showing electrical connections.
Charts showing lubrication points and recommended intervals for the drive unit and deck.
To Next Page
