Lathem 2000 User Manual

Mechanical Time Recorder User’s Guide
Page 9
Set the Time on the Digital Clock Face
Figure 6
1. Make a sample registration on paper.
2. Use the Hour and Minute buttons to set the display to the
time shown on the sample registration.
3. To synchronize the display with the type wheels, listen for
the type wheels to click. At the click, press the minute
button to advance to the next minute. Seconds are now
synchronized. Always set the display to regular minutes.
Refer to Figure 3, “dial of decimal equivalent” if using
hundredths or tenths.

Lathem 2000 Specifications

General

Brand	Lathem
Model	2000
Category	Clock
Language	English