Lathem TruAlign 800P - User Manual

TruAlign Time Recorder
Model 800P
Installation & User's Guide

Summary

Quick Easy Setup (Wall Mount)

Quick Easy Setup (Table Top Mount)

Factory Settings

Programming the 800 P

Setting the Time

Setting the Date and Other Functions

Set up Functions

Function 1 - Set Month

Instructions for setting the current month on the time recorder.

Function 2 - Set Date

Instructions for setting the current date on the time recorder.

Function 3 - Set Year

Instructions for setting the current year on the time recorder.

Function 4 - Change Factory Default Daylight Savings

Function 15 - TruAlign Calibration; Print Head Test

Initiates calibration and testing for the print head and alignment.

Wall Mount

Mounting to a Wall

Using the Time Recorder

Appendix A - Changing the Print Intensity

Appendix B - Calibrating the TruAlign Function

Function #; TruAlign Calibration

Initiates the TruAlign calibration mode via function selection.

CAL 1

First step in calibration: setting the initial alignment value.

CAL 2

Second step in calibration: setting the secondary alignment value.

Appendix C - Testing the Print Head

Appendix D - Changing the dates for Daylight Savings

FREQUENTLY ASKED QUESTIONS

Lathem TruAlign 800P Specifications