Lathem TruAlign 800P - Function 15 - TruAlign Calibration; Print Head Test

800P TruAlign Time Recorder User Guide
Page 25
Function 15 – TruAlign Calibration / Print Head Test
When prompted to activate the TruAlign Calibration / Print
Head Test, press the SET button to accept the factory setting.
After pressing the SET button the time recorder will go to the
normal time/date display and will be operational.
Note: Normally you would press the SET button to by pass the
TruAlign calibration function.
For more information see:
Appendix C - Calibrating the TruAlign Function
Appendix D - Testing the Print Head