Lathem TruAlign 800P - Function 3 - Set Year

800P TruAlign Time Recorder User Guide
Page 17
Function 3 – Set Year
When prompted to set the year, use the + button to scroll
forward or the - button to scroll backwards. With the desired
year showing on the display, press the SET button. The ‘Set
DST’ function (4) will display next.
Example: Set the year from 01 to 09
Step 1
Press the  or - button until the display
shows ‘09’.
Step 2
Press the SET button when the year is
correct. The year will be accepted, go to the
‘Change Factory Default Daylight Savings’
function.
Note: If you scroll past the year you wish,
continue pressing the  or - button until
the desired date displays, then press the SET
button.
3 : 0 1
3 : 0 9
F
unction
#
Year