Lathem TruAlign 800P - Page 26

800P TruAlign Time Recorder User Guide
Page 27
Step 3
Using the supplied 6/32 x 3/8
Philips head screws install the
back-plate to the wall-mount
bracket.
Wall
Step 4
With the back-plate secured to the
wall-mount bracket, plug the AC
wall adapter into the time
recorder. Align and place the time
recorder on the back-plate and
secure the two together with the 8-
32 x ¼ Philips head screw, being
careful not to pinch the AC cord.
Plug the wall adapter into the AC
outlet.
Wall
Note:
Mak
e sure the bottom
of the timecard shelf is over
the edge of the back-plate
before securing the screw.