Lauda Hydro H 22 Hydro H 24 User Manual

Operating Instructions
Hydro Water Baths
H 4, H 8, H 16, H 22, H 24, H 41, H 8 A, H 16 A

Lauda Hydro H 22 Hydro H 24 Specifications

General

Brand	Lauda
Model	Hydro H 22 Hydro H 24
Category	Laboratory Equipment
Language	English

Summary

Hydro Water Bath Operating Instructions

Initial Use and Setup

Intended Use and Safety Precautions

Details the proper applications for LAUDA Hydro Water Baths and warns against misuse to prevent damage or injury.

Transport, Setup, and Location Guidelines

Provides guidance on safely transporting, positioning, and selecting a suitable location for the water bath unit.

Power and Water Filling Procedures

Specifies operating voltage requirements and instructions for filling the water bath with tap water.

Control System Operation

Unit Initiation and Main Menu Navigation

Covers the initial startup of the water bath and navigation of the main menu for setting parameters.

Basic Settings Menu Access

Temperature Set Point Limits and Alarms

Malfunction Alarms and Error Codes

Explains the function control, visual/acoustic alarms, and interpretation of error codes for malfunctions.

Maintenance and Troubleshooting

Low Water Cut-off Protection

Details the low water cut-off function, its error code (001), and reset procedure to protect the heating element.

Temperature Alarm Diagnostics

Over-Temperature and Sensor Faults

Covers over-temperature alarms (Code 003), sensor interruptions (Code 004), and short circuits (Code 005).

Cleaning and Decontamination

Technical Specifications

Electrical Diagrams and Connections