Lauda PD 4 R User Manual

Operating Instructions
Puridest Distillation Apparatus
PD 2 R, PD 4 R, PD 8 R, PD 12 R
DOMINIQUE DUTSCHER SAS

Lauda PD 4 R Specifications

General

Pump Capacity Flow Rate	15 L/min
Bath Volume	4 L
Pump Type	Pressure/Suction pump
Pump Flow Rate Max	15 L/min
Power Consumption	2.5 kW
Heating Capacity	2 kW
Power Supply	230V / 50-60Hz
Interface	RS232

Summary

Distillation Apparatus Usage

Intended Use

Describes the primary purpose and capabilities of the LAUDA Puridest Distillation Apparatus.

Improper Use Scenarios

Outlines unsafe or incorrect applications and environments for the distillation apparatus.

Installation and Location Guidelines

Mains Power Connection

Water Connections Overview

Distillate Withdrawal Process

Cooling Water Outlet Routing

Tap Water Inlet Connection Setup

Apparatus Initiation Procedures

Pre-Start Water Filling

Instructs on manually filling the boiler with water before the initial power-on.

Initial Operation Sequence

Functional Description of Operation

Maintenance, Service, and Troubleshooting

Descaling Procedure

Provides instructions for removing scale buildup from the boiler using appropriate agents.

Pilot Lamp Fault: Foam Formation

Pilot Lamp Fault: Back Water

Re-initiation After Low Water

Technical Data: PD 2 R and PD 4 R

Technical Data: PD 8 R and PD 12 R

Mains Connection and Fuses

Mains Connection Examples: PD 2 R/PD 4 R (230V)

Mains Connection Examples: PD 2 R/PD 4 R (400V)

Mains Connection: PD 8 R (230V/1~ to 220V/3~)

Mains Connection: PD 8 R (230V/1~ to 400V/3~)

Mains Connection: PD 8 R/PD 12 R (220V/3~)

Mains Connection: PD 8 R/PD 12 R (220V/3~ CEE)

Mains Connection: PD 8 R/PD 12 R (400V/3~)