Lauda UC 80 - Accessories and Consumables

49
9 ACCESSORIES AND CONSUMABLES
The following accessories and consumables are available for the Ultracool units.
Accessories for UC 2 and UC 4 230V/1Ph/50Hz (BSP) (1)
Catalogue number
IK10: 2x10m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000001
IK20: 2x20m Installation Kit: Includes 2 hoses and 2 sets of fittings
A000004
EB: External by-pass: Required when the temperature difference between inlet and
outlet is higher than 10 °C to avoid possible damages of components
A000009
PRV: Pressure Reducing Valve: For adjustment of the maximum pressure with pressure
sensitive applications
A001513
SV: Water Solenoid Valve kit: To avoid fluid return from an application installed above
the chiller. Includes check valve and solenoid valve
A001514
RCP: Remote Control Panel: For installation away from the unit. Cable length 10
metres, electrical protection IP40
A001561
(1) BSP = Rp = G parallel thread
Accessories for UC 2 and UC 4 230V/1Ph/60Hz (NPT) (2)
Catalogue number
IK10: 2x10m Installation Kit: Includes 2 hoses and 2 sets of fittings
A001515
IK20: 2x20m Installation Kit: Includes 2 hoses and 2 sets of fittings
A001516
EB: External by-pass: Required when the temperature difference between inlet and
outlet is higher than 10 °C to avoid possible damages of components
A001508
PRV: Pressure Reducing Valve: For adjustment of the maximum pressure with pressure
sensitive applications
A001509
SV: Water Solenoid Valve kit: To avoid fluid return from an application installed above
the chiller. Includes check valve and solenoid valve
A001510
RCP: Remote Control Panel: For installation away from the unit. Cable length 10
metres, electrical protection IP40
A001561
(2) NPT = NPT taper thread