LAUNCH TECH X-431 PRO MINI - 1.4 Technical Parameters

LAUNCH X-431 PRO MINI User Manual
4
①
OBD-16 diagnostic
connector
To connect on vehicle’s OBD2 DLC.
②
Mini USB port
For connecting the USB cable to the tablet to
perform vehicle diagnosis. (Note: This port is
disabled for X-431 PRO MINI.)
③
Mode indicator
y It illuminates red when the VCI module is
connected to the vehicle’s DLC.
y Blue indicates the VCI module is working in
Bluetooth mode.
1.4 Technical Parameters
X-431 PRO MINI:
Operating system
Android 5.1
Processor
Quad core 1.3 GHz
Memory
2GB
Storage
16GB
LCD screen
6.9 inch with a resolution of 1280 x 720 pixels
Camera
Front-facing 2MP camera + rear-facing 5MP camera
Battery
3.7V/3000mh rechargeable polymer lithium battery
Connectivity
 Wi-Fi: WLAN 802.11b/g/n
 Bluetooth: Bluetooth 4.1
Working temperature
0 ~ ℃ 45℃
Storage temperature
-10 ~ ℃ 50℃
VCI module:
Working voltage
9 ~18V
Average working current
About 85mA
Standby current
About 55mA
Working temperature
-10℃ ~ 55℃
Storage temperature
-20 ~ 70℃℃
Relative humidity
20% ~ 90%