LAUNCH TECH X-431 PAD V User Manual

Version: V1.00.000
Revised date: Feb-27-2018
LAUNCH owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software,
LAUNCH will block the use of this product and reserve the right to pursue their legal liabilities.

LAUNCH TECH X-431 PAD V Specifications

General

Operating System	Android 9.0
Screen Size	10.1 inches
Resolution	1920 x 1200 pixels
RAM	4 GB
Internal Storage	64 GB
Battery Capacity	7000 mAh
Camera (rear)	5 MP
Camera (front)	2 MP
Connectivity	Wi-Fi, Bluetooth
Ports	USB, HDMI
Expandable Storage	Yes
Processor	Octa-core
Special Features	Diagnostic tools, Vehicle coverage

Summary

IMPORTANT SAFETY INFORMATION

3 Preparations

3.1 Charging X-431 PAD V

Instructions for charging the tablet using the power adapter or docking station.

3.4 Wi-Fi Setup

4 Initial Use

4.2 Register & Download Diagnostic Software

Steps for creating an account, registering, and downloading diagnostic software.

4.3 Function Modules

5 Start Diagnostics

5.1 Connections

Details preparation, DLC location, and vehicle connection methods for diagnosis.

5.3 Start Diagnostics

Guides on initiating diagnostic sessions using AutoDetect (VIN SCAN) or Manual Diagnosis.

5.4 Maintenance Reset

Covers various service functions like Oil Reset, EPB Reset, Steering Angle Calibration, ABS Bleeding, etc.

5.5 Remote Diagnosis

6 User Info

6.1 My Report

6.3 Activate VCI

7 ToolBox

7.1 Sensorbox & Multimeter (Optional)

7.2 Batterybox (Optional)

7.3 Oscilloscope (Optional)

Covers the optional add-on module for automotive oscilloscope and ignition waveform analysis.

7.4 Ignition (Optional)

Analyzes secondary signals for various engine ignition systems.

7.5 Videoscope (Optional)