LAUNCH TECH X-431 PAD V - Clear Cache; About; Auto Update; Login;Exit from Current Account

46
LAUNCH X-431 PAD V User's Manual
password is not required), and then tap “Conrm”.
4. Once the Wi-Fi network of the printer is connected and the printer
is found, tap “Printing test” to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory
settings (refer to Step 2 for details) and check whether the current
device and the printer are on the same LAN.
B. If you have congured the Wi-Fi printer to the LAN:
2. Tap “Connect to Printer”:
a). If the local network remains as it is, tap “Test Print” directly to test
the printing.
b). If the local network changes, you have to reset the Wi-Fi printer.
6.12.4 Clear Cache
This item is used to clear the App cache.
Tap “Clear Cache”, a pop-up window will appear on the screen. Tap
“OK” to clear cache and the system will restart the App.
6.12.5 About
The software version information and disclaimer are included.
6.12.6 Auto Update
This option is used to set whether automatic update function is ON.
6.12.7 Login/Exit from current account
To logout the current user ID, tap “Exit from current account”.
To login the system again, tap “Login”.