30
LAUNCH X-431 PAD V
User's Manual
Fig. 5-37
Simply follow the on-screen instructions and make appropriate
selections to complete the test. Each time when an operation is
successfully executed, “Completed” displays.
5.4 Maintenance Reset
In addition to amazing & powerful diagnostic function, X-431 PAD V
also features various service functions. The most commonly performed
service functions contain:
• Oil Reset Service
• Electronic Parking Brake Reset
• Steering Angle Calibration
• ABS Bleeding
• TPMS (Tire Pressure Monitor System) Reset
• Gear Learning
• IMMO Service
• Injector Coding
• Battery Maintenance System
• Diesel Particulate Filter (DPF) Regeneration
• Electronic Throttle Position Reset
• Gearbox Matching
• AFS (Adaptive Front-lighting System) Reset
• Sunroof Initialization
• Suspension Calibration
There are two methods to reset service lamp: Manual reset or Auto
reset. Auto reset follows the principle of sending command from the
tool to vehicle’s ECU to do resetting. While using manual reset, users
just follow the on-screen instructions to select appropriate execution
options, enter correct data or values, and perform necessary actions,
the system will guide you through the complete performance for
various service operations.
Select “Reset”
Select the desired reset
item (e.g. oil lamp reset
etc.)
Select the car brand
Select the service mode
(The available mode varies
from vehicle to vehicle)
Follow the instructions
on the screen to operate
Figure 5-38
5.4.1 Oil Reset Service
This function allows you to perform reset for the engine oil life system,
which calculates an optimal oil life change interval depending on the
To Next Page
Loading...