4.3 Tool Setup
Select [Tool Setup] in the main menu and press [ ], the system will enter the
following screen:
Figure 4-21
1) Beeper: Turn ON/OFF the Beeper.
Select [Beeper] in the main menu and press [
] to switch to the screen shown
as below:
Figure 4-22
The icon
will appear at bottom of the screen if Beeper is set to ON.
2) Time and Date: Set time and date.
Select [Time and Date] in the main menu and press [
] to enter the setting
screen, as shown in Figure 4-23.
To Next Page
Loading...
