22
FX9000 User Manual
Figure 4-2
• If the network you chose is open, you can connect directly;
• If the selected network is encrypted, you have to enter the right security
key (network password).
Note: If you choose “Ignore” in WLAN setup, it will go into the date
setting page. If the tool has been properly connected to the Internet, the
system will automatically obtain the correct network date and time and
navigate to step 6.
6. After the network connection is done, tap “Next Step” to configure email
address. Input the email address, and tap “Next Step” to go to next step.
Note: You are strongly recommended to ll in the valid email address.
Once you configured this option, the system will automatically send the
diagnostic report to your email box every time a complete Auto-Detect
process is successfully nished.
7. Carefully read all terms and conditions of the user agreement, check the box
before the “Agree to all the above terms”, and tap “OK” finish the sign-up
process and navigate to Job Menu.
To Next Page
Loading...
Need help?
General
