23
FX9000 User Manual
4.3 Job Menu
It mainly includes the following function modules.
Figure 4-3
Diagnose
To congures the tool to operate as a professional diagnostic
tool.
I/M
A quick access to the I/M Readiness function of OBD II
Diagnosis. I/M refers to Inspection and Maintenance that
is legislated by the Government to meet federal clean-air
standards. I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating
properly and are ready for Inspection and Maintenance testing.
Note: This function also can be done by performing "OBD II" ->
"I/M Readiness". For detailed operation, please refer to Chapter 5.3.
OBD II
This option presents a quick way to check for DTCs, isolate
the cause of the illuminated Malfunction Indicator Lamp (MIL),
check monitor status prior to emissions certification testing,
verify repairs, and perform a number of other services that are
emission-related.
Reset
To perform all kinds of common repair & maintenance items,
including Oil Reset Service, Electronic Parking Brake Reset,
Steering Angle Calibration, ABS Bleeding, TPMS Reset, Gear
Learning, IMMO Service, Injector Coding, Battery Mainte-
nance System, Diesel Particulate Filter (DPF) Regeneration,
Electronic Throttle Position Reset, Gearbox Matching, AFS
(Adaptive Front-lighting System) Reset, Sunroof Initialization
and Suspension Calibration.
To Next Page
Loading...
