Launch X-431 User Manual

I
www.x431.com +86 755 8455 7891
LAUNCH Station
User's Guide
Copyright Information
Copyright © 2019 LAUNCH TECH CO., LTD. All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this
information as applied to other units.
Neither LAUNCH nor its afliates shall be liable to the purchaser of this unit or third parties for damages,
losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse
of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply
with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or
problems arising from the use of any options or any consumable products other than those designated as
Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.
LAUNCH owns the complete intellectual property rights for the software used by this product. For any
reverse engineering or cracking actions against the software, LAUNCH will block the use of this product and
reserve the right to pursue their legal liabilities.
All information, specications and illustrations in this manual are based on the latest information available at
the time of printing.
LAUNCH reserves the right to make changes at any time without notice. While information of this manual
has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of
the contents, including but not limited to the product specications, functions, and illustrations. LAUNCH will
not be liable for any direct, special, incidental, indirect damages or any economic consequential damages
(including the loss of prots).
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (LAUNCH) in China and other countries.
All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in
this manual are either trademarks, registered trademarks, service marks, domain names, logos, company
names of or are otherwise the property of LAUNCH or its afliates. In countries where any of the LAUNCH
trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain names, logos, and company
names. Other products or company names referred to in this manual may be trademarks of their respective
owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark, service mark, domain
name, logo, or company name. You may contact LAUNCH by visiting the website at www.cnlaunch.com,
or writing to LAUNCH TECH. CO., LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang,
Bantian, Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to use Materials on
this manual for purposes or for all other questions relating to this manual.
Statement: The following trademarkes mentioned in this user’s guide are only for illustrative purpose, not for
commercial use.
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc..
Android is a trademark of Google LLC.
The Android robot is reproduced or modied from work created and shared by Google and used according
to terms described in the Creative Commons 3.0 Attribution License.
Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated.
Other trademarks and trade names are those of their respective owners.

Launch X-431 Specifications

General

Operating System	Android
RAM	2GB
Processor	Quad-core
Storage	16GB
Battery	Rechargeable lithium-ion
Connectivity	Wi-Fi, Bluetooth
Diagnostic Functions	coding
Special Functions	Oil reset, EPB reset
Software Updates	Online updates
Supported Protocols	CAN
Languages	Multiple languages

Summary

Warning Symbols and Definitions

Important Safety Information

1 Knowledge of X-431 Station

1.1 Background

Provides a brief overview of the X-431 Station and its purpose in vehicle diagnostics.

1.2 Features & Advantages

Details the hardware and software features and benefits of the X-431 Station.

1.3 Scenario Application

Illustrates practical use cases and workflows for the X-431 Station in a repair environment.

1.4 Accessory Checklist

Lists all the standard accessories included with the X-431 Station for proper setup.

1.5 Components & Controls

Identifies and describes the various physical components and controls of the X-431 Station.

2 Initial Use

2.1 Assembling the X-431 Station

Step-by-step instructions for assembling the mobile diagnostic workbench and its components.

2.2 Getting Started

Guides users through the initial power-on, home screen navigation, and basic setup.

2.3 Register & Download Diagnostic Software

Instructions for new users to register their device and download necessary diagnostic software.

2.4 Function Modules

Overview of the main diagnostic function modules available on the X-431 Station.

2.5 Diagnostics Toolbar

Explains the buttons and functions available in the diagnostics toolbar for quick operations.

2.6 Preparation & Connections

Details the necessary preparation steps and connection methods for vehicle diagnostics.

2.7 Communication Setup

Guides on setting up communication between the diagnostic tool and the VCI device.

3 Start Diagnostics

3.1 Intelligent Diagnose

Explains how to perform quick vehicle diagnosis using VIN identification and cloud data.

3.2 Manual Diagnose

Provides steps for manually selecting vehicle models and systems for diagnosis.

3.3 Reset Services

Covers common maintenance reset functions for various vehicle systems.

3.4 Feedback

Guides on how to submit diagnostic problems and feedback for analysis and troubleshooting.

3.5 Remote Diagnosis

Details how to perform instant messaging and remote diagnosis with other technicians.

3.6 Software Update

Instructions on how to update the diagnostic software and applications on the tool.

3.7 ADAS Calibration

Information on activating and using ADAS calibration functions with specific tools.

3.8 Reports

Explains how to view, manage, and combine various diagnostic reports.

3.9 Help

Provides access to vehicle coverage, maintenance data, product manuals, and FAQs.

4 Toolbox & Other Apps

4.1 Sensorbox & Multimeter

Details the optional Sensorbox and Multimeter functions for simulation and testing.

4.2 Batterybox

Describes the optional Batterybox for automotive battery testing and system analysis.

4.3 Oscilloscope

Explains the optional Scopebox for automotive oscilloscope and ignition waveform analysis.

4.4 Ignition

Covers ignition system testing and secondary signal analysis using the Scopebox.

4.5 Videoscope

Details the optional Videoscope for inspecting unseen engine and vehicle parts.

4.6 Wallet App

4.6.1 Registering Wallet

Guides on how to register a Wallet account for token management and benefits.

4.6.2 Obtaining Wallet Tokens

Explains the methods to obtain wallet tokens or points through device activation and referrals.

4.6.3 Checking Wallet Tokens

Details how to check the total number of wallet tokens available in the account.

4.6.4 Backing Up Wallet Tokens

Provides instructions on how to backup wallet tokens and keystore for security.

4.7 TeamViewer

4.7.1 TeamViewer QuickSupport

Guides on how to request remote support from a partner using TeamViewer QuickSupport.

4.7.2 TeamViewer Remote Control

Explains how to remotely control a partner's device using TeamViewer software.

FAQ

Hardware Troubleshooting

Addresses common issues related to the diagnostic tool's hardware components.

Software Troubleshooting

Covers common problems related to software operation, activation, and connectivity.

Warranty and Customer Service

Warranty Information

Details the warranty terms and conditions for LAUNCH electronic products.

Order Information

Provides information on how to order replaceable and optional parts for the tool.

Customer Service Contact

Lists contact details for customer support and inquiries regarding the unit.