About X-431 Station
DiagnosticsToolbox & AppsFAQ
Initial Use
73
www.x431.com +86 755 8455 7891
LAUNCH
Station
User's Guide
Product S/N
Activation Code
Password Envelope
3.10.5 Fix Connector Firmware/System
Use this item to upgrade and x the diagnostic VCI rmware/system.
Note: During upgrade, do not perform other operations, switch to other interfaces, or cut off power to the VCI
device.
Fix VCI Firmware/System Screen
• If the diagnostic function is abnormal, tap or click "FIX CONNECTOR FIRMWARE" to x it.
• If the connection between the VCI device and the diagnostic tool is abnormal, try to plug the VCI device
and power it on again. If the problem still exists, tap or click "FIX CONNECTOR SYSTEM". The xing
process takes about 1~5 minutes. If the VCI device beeps, it indicates the process is completed.
3.10.6 ROXIE W/TPMS Management
This option is used to bind the ROXIE W device and the Pilot TPMS device to the mobile diagnostic center.
Once bound, the reports generated by the ROXIE W device and the Pilot TPMS device will be automatically
pushed to the mobile diagnostic center and reminded each time the inspection session is nished.
To Next Page
Loading...
Need help?
General
