INTRODUCTION
This manual was drafted in accordance with the EEC Guidelines contained in Directive no.
392/89 as amended. This manual contains important information pertinent to operator safety.
Read this manual through at least once before operating the machine. The manufacturer
reserves the right to modify this manual and the machine itself with no prior notice. We
therefore recommend checking any updates. This manual must accompany the machine in
case of sale or other transfer.
CARE OF THE MANUAL
This manual must be kept in a cool, dry place and must be kept for the entire life of the
machine. Take care not to damage this manual in whole or in part during consultation. Do not
remove pages from this manual. Do not write on the pages; space for notes is provided at the
end of each chapter.
WARRANTY
This product is warranted against any defect in materials and/or construction for a period of 1
(one) year from the date of delivery. The warranty consists of free-of-charge replacement or
repair of defective component parts or parts considered defective by the Manufacturer.
Reference to the machine serial number must be included in any requests for spare parts.
Parts not covered by the manufacturer warranty are: pressure gauges.
This warranty does not cover defects arising from normal wear, incorrect or improper
installation, or phenomena not inherent to normal use and operation of the product.
Manufacturer guarantees the perfect suitability of the materials used for packing, in terms both
of composition and mechanical strength/resistance. The guarantee does not cover
breakdowns attributable to damage suffered during shipping or warehousing or caused by the
use of accessories not meeting manufacturer’s specifications, or to tampering with or repair of
the product by unauthorized personnel. It is of utmost importance that the crates containing
the machine be carefully inspected, upon delivery, in the presence of the shipping agent. We
recommend performing inspection with extreme care, since damages to the crates due to
shocks or dropping are not always immediately visible thanks to the shock-absorbing capacity
of today’s composite packing materials. The apparent integrity of the packing materials does
not exclude possible damage to the goods, despite the due care taken by the manufacturer in
packing them.
NOTE: Regarding the above, the Manufacturer reminds the Customer that according to
international and national laws and regulations in force the goods are shipped at the sole risk
of the latter and, unless otherwise specified in the confirmation of order phase, the goods are
shipped uninsured.
The Manufacturer therefore declines any and all responsibility in merit of REQUESTS for
damages due to shipping, loading and unloading, and unpacking. The product for which repair
under guarantee is requested must be shipped to the manufacturer under the customer’s
exclusive responsibility and at the customer’s exclusive expense and risk. In order to avoid
damage during shipping for repairs, the Manufacturer’s original packing must always be used.
The manufacturer declines any and all responsibility for damage to vehicles on which
recovery/recycling and recharging are performed if said damage is the result of unskillful
handling by the operator or of failure to observe the basic safety rules set forth in the
instruction manual. This warranty replaces and excludes any other warranty or guarantee that
the seller is required to provide under law or contract and defines all the customer’s rights in
regard of faults and defects and/or scarce quality in the products as purchased. Failure to
observe the aforementioned conditions shall invalidate all forms of warranty on the MACHINE.
www.diagtoools.lv
Diagtools LTD
To Next Page
Loading...