Performance Velocity, Probability and Mutation
Step parameters may now be performed live, allowing you to get hands on with your
sequences and create interesting and intricate rhythms on the fly.
To perform with any of these parameters, first make sure sequencer playback is active by
pressing the play button in any of the sequencer views. Next, ensure that there are populated
steps in the currently playing pattern for the currently viewed track. Now press [Velocity],
[Probability] or [Mutation] to enter a step parameter view. You may now press any of the
Velocity, Probability or Mutation values to momentarily override the values assigned to each
step.
This feature can be very useful for creating dynamics in drum beats, melodies or basslines
rapidly, particularly with velocity which is often mapped to the amp level of a synth or
sample.
Live performance of these step parameters may be recorded to a pattern. Press record to
enable recording, perform with Velocity, Probability, and/or Mutation, then press record once
again to stop recording.
To Next Page
Loading...