Why have blowing and vacuum?
Hints on usage
8
Angora / Wool
• Steam iron about 10 cm from the surface of the material, in order not to damage it.
• Shake the garment by hand so that it regains its normal shape.
Silk
Vertical removal of creases
Hang the garment on a coat
hanger or hold it up.
With a sweeping movement from
top to bottom lightly touch the
material while giving short bursts
of steam.
Note: It is easy to remove creas-
es from most materials, except
for cotton, linen and some silks.
If it is difficult to remove the
creases from a material, iron it as
normal on the ironing board.
Special materials
• Velvet
• Corduroy
• Jersey
If you are not using a
Softpressing soleplate, steam
iron 2-3 cm from the surface of
the material, then finish by hand.
Steam iron silk in the normal
way.
In the case of dark silk you are
advised to use a Softpressing
soleplate.
English
Perfect ironing requires steam to be injected into the fabric. This is a requirement for the complete
removal of creases. Do not continually inject steam into fabric: press the steam control button intermit-
tently. For this the LauraStar
™
Magic Evolution / II system uses the same methods as professional dry
cleaning: vacuum and blowing.
To improve the quality of ironing and increase the autonomy of your appliance, steam iron the material first
and then re-iron it without steam, in order to dry the material.
blowing
vacuum
Velvet
Back Buttons Welt Legs Inside Sleeves Bottons Top Pleats
and collar and creases and lining and collar
To Next Page
Loading...
