Need help?Do you have a question about the LauraStar S4a and is the answer not in the manual?
Plug the ironing system into an electrical socket for power supply.
Activate the main power switch to turn on the ironing system.
Use the "Manual Steam Delivery" button to generate steam during ironing.
Briefly press the "Fan" button to switch between Fan and Vacuum modes.
Hold the "Fan" button for over 3 seconds to toggle between pulsing and continuous steam modes.
Access programming mode by holding "Fan" and "Manual Steam Delivery" buttons for 3+ seconds to adjust settings.
Adjust steam velocity (1-3 portions/sec) by holding "Manual Steam Delivery" button for hybrid steam.
Set fan off delay (0-60 seconds) by short pressing the fan option.
Use LUK-Cards by holding them to the control panel to read settings and configure the ironing system.
Turn Perao LUK on/off by pressing the "Fan" button for over 3 seconds.
Turn off the main system switcher to power down the ironing system.
Disconnect the ironing system from the electrical socket.
The red warning lamp indicates the boiler needs washing.
Rinse the boiler as instructed, ideally 2.5 hours after ironing or before next use.
The red light turning off signifies the boiler has been successfully washed.
Update software via upgrade kit for new features and bug fixes.
Respect Perao's copyright; reproduction/distribution/modification of software is prohibited.
Details product name, power, dimensions, mass, and operating conditions.
Provides contact details and website for LTD "Perao".
Power| voltage | 220-240 V |
|---|---|
| frequency | 50/60 Hz |
| electric capacity | 2.5 W |
Operating Environment| air temperature | 16ºC to 30ºC |
|---|---|
| humidity | not greater than 93% at 25ºC |
Weight and Dimensions| width | 80 mm |
|---|---|
| height | 180 mm |
| depth | 60 mm |
| net mass | 160 g |
To Next Page
