68
ITEN
DESCALING
Carefully read the descaling instructions.
Limescale normally builds up with extended use of
the appliance; the machine needs descaling every 2
months and/or whenever a reduction in water flow is
noticed.
The descaling cycle will be requested by the machine
through the switching-on of the special warning lamp
available .
Do not switch the machine off when the descaling
cycle is under way. Do not move away from the ma-
chine when the descaling cycle Is under way.
The cycle will have, once it has been started, to be
performed completely.
Check there is no capsule inside the capsule con-
taining compartment. The milk whipping jug shall
not been inserted during the descaling cycle.
Remove and empty the water tank and remove the
milk whipping jug.
Do not drink the descaling solution and products
dispensed until the completion of the cycle.
Never use vinegar as a descaling solution.
To decalcify the machine, It Is recommended that the
LAVAZZA DESCALING agent should be used.
Fill the tank with the LAVAZZA DESCALING
agent (250 ml) and water (250 ml). Fit the tank back
into place on the machine
.
Use a moist cloth to wipe off the squirts or drops, if any.
Put the tank back in place on the machine.
MAINTENANCE AND CLEANING
DESCALING
DECALCIFICANTE
durgol
The Swiss Or
iginal
agains
t Limescale
To Next Page
Loading...
